THE DESIGN AND CONSTRUCTION OF FM RADIO TRANSMITTER
ABSTRACT: An FM transmitter is an electronic device which, with the aid of an antenna, produces radio waves. The transmitter itself generates a radio frequency alternating current, which is applied to the antenna. When excited by this alternating current, the antenna radiate...
View DetailsA REVIEW OF AWARENESS LEVEL AND PRACTICES OF GREEN CONSTRUCTION
ABSTRACT: In spite of the huge environmental and energy problem in Nigeria, designers have not seen the need for a shift from their traditional method of designing buildings. Green building which is also known as sustainable buildings are buildings which represents friendly struc...
View DetailsAN ASSESSMENT OF THE DESIGN AND CONSTRUCTION OF 5KVA INVERTER
BACKGROUND OF THE STUDY: The unreliability of the nation's electrical power supply is a well-established truth in today's society. There is now a substantial disruption in the provision of electrical power over the whole planet. As a consequence of the disruption in...
View DetailsAN ASSESSMENT ON THE ADOPTION AND IMPLEMENTATION OF GREEN CONSTRUCTION
ABSTRACT: In spite of the huge environmental and energy problem in Nigeria, designers have not seen the need for a shift from their traditional method of designing buildings. Green building which is also known as sustainable buildings are buildings which represents friendly...
View DetailsANALYTICAL DESIGN AND CONSTRUCTION OF AUTOMATIC SOLAR STREET LIGHT
INTRODUCTION: Since the discovery of electrical energy for illumination, it is evident that human interaction is required to operate the switch, either off when not in use or ONM when needed. Because of this reason, as well as a lack of electricity supply, there has been a p...
View DetailsAWARENESS AND PRACTICE OF GREEN CONSTRUCTION
ABSTRACT: In spite of the huge environmental and energy problem in Nigeria, designers have not seen the need for a shift from their traditional method of designing buildings. Green building which is also known as sustainable buildings are buildings which represen...
View DetailsCOMPARING THE STRENGTH AS BLOCKS MADE FROM CEMENT AND LATERITIC SOIL, CEMENT AND RED EARTH, LATERITE, SAND AND RED EARTH
INTRODUCTION: This project was obligated to present in o n e volume of the fundamental and practical information in the field of comparing the strength of blocks made from: cement and laterite soil, cement and red earth and sand, red earth and lateritic soil and mud blocks fired...
View DetailsDESIGN AND CONSTRUCTION OF 1KVA UNINTERRUPTED POWER SYSTEM (UPS)
ABSTRACT: A UPS system is a DC to AC conversion system of 1KVA power rating and expected to carry around 800 watts load. It provides power to electronic and electrical appliances such as radio sets, TV DVD/VCD, computers, fans and lighting. The design was conceived and put d...
View DetailsDESIGN AND CONSTRUCTION OF 5KVA POWER INVERTER
BACKGROUND OF THE STUDY: It is a well known fact today that electrical power supply is not reliable. All over the world, there is a significant electrical power supply interruption. Because of these electrical power supply interruption, many electrical instruments have...
View DetailsDESIGN AND CONSTRUCTION OF A METRE BRIDGE
BACKGROUND HISTORY OF WHEATSTONE BRIDGE: The study of electricity is an important aspect of physics because electricity plays a key role in the modern world. The working of most modern appliances such as radio, television, computers and calculators, refrige...
View DetailsDESIGN AND CONSTRUCTION OF A MULTIPERPOSE SECURITY SYSTEM WITH ALARM AND DISPLAY
ABSTRACT: This project report is a thesis written specifically to cover the design analysis construction, test and packaging of a multipurpose security system from electric component that can be easily be obtainable from the market.
The report discusses the various unit...
View DetailsDESIGN AND CONSTRUCTION OF A SINGLE PHASE AUTOMATIC CHANGE OVER SWITCH WITH PHASE SELECTOR
INTRODUCTION: Change over switch is a device used to switch off a power supply and subsequently switch on another power source. Basically it is aimed at switching on a more convenient power supply to the load. Since it switches on power to the load precaution has to be taken whil...
View DetailsDESIGN AND CONSTRUCTION OF A SPIN DRYER
ABSTRACT: This work is aimed at designing and fabricating a spin dryer which can be used in drying spent grains after brewing. This will no doubt save considerable human labours and time wastage involved in conventional method of drying the spent grains by spreading on the ground...
View DetailsDESIGN AND CONSTRUCTION OF AN AUTOMATIC PHASE SELECTOR
ABSTRACT: This is a technical report presented on the design and construction of an Automatic Phase Selector. In the construction work, an ordinary level knowledge of electronics principles are observed. We aimed at presenting a practical aspect of the subject and then providing...
View DetailsDESIGN AND CONSTRUCTION OF AN AUTOMATIC VOLTAGE STABILIZER
ABSTRACT: In the world today, the use of power supply in electronics equipment and gadgets has increased and it is still increasing. These power supplies are not stable as required by these electronics. This arise the need for the power stabilization as to overcome thi...
View DetailsDESIGN AND CONSTRUCTION OF AN INTRUDER DETECTOR FOR OFFICE AND HOME USE
Background of Study: Environmental, home and office security against intruders has become a thing of individual, national and international concern. The essence of this project is to provide a cost effective and more efficient security system in areas like homes,...
View DetailsDESIGN AND CONSTRUCTION OF AUTOMATIC QUICK BUZZER SYSTEM
BACKGROUND OF THE STUDY: Quiz buzzers are used often at places like educational institutions where it is required for game shows and also in live quiz competitions broadcasted via television. A quiz buzzer allows any user to press the switch quickly in response to a question pose...
View DetailsDESIGNING AND CONSTRUCTING AN AUTOMATIC SOLAR STREET LIGHT
INTRODUCTION: Since the discovery of electrical energy for illumination, it is evident that human interaction is required to operate the switch, either off when not in use or ONM when needed. Because of this reason, as well as a lack of electricity supply, there has been a p...
View DetailsDESIGN AND CONSTRUCTION OF AUTOMATIC PUMPING MACHINE FOR WATER SUPPLY
INTRODUCTION: Water is an indispensable and inevitable substance to all living things due to its usability and high priority among other substance and materials. Provision of large volume of waters essential due to its significant purpose, which therefore called for a means by wh...
View DetailsDESIGN AND CONSTRUCTION OF WOOD LATHE MACHINE
INTRODUCTION: The wood lathe machine is introduced to lessen the human suffering and to improve economical and technological standard, and for years now Nigeria recognized that she was economically and technological poor and has been economically dependents on the western world f...
View DetailsTHE EXTENT OF IMPLEMENTATION OF SAFETY PRACTICES IN BIOLOGY LABORATORY AMONG SENIOR SECONDARY SCHOOL STUDENTS IN ENUGU SOUTH LOCAL GOVERNMENT AREA
CHAPTER ONE
INTRODUCTION
BACKGROUND OF THE STUDY: Individuals have different conception of what science is, some see science as a body of knowledge while some see it not only as a composite of codified body of knowledge but al...
View DetailsTHE DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED DOT MATRIX ADVERT DISPLAY
CHAPTER ONE
INTRODUCTION
The purpose of this project is to produce a narrative description of the design and construction of a microcontroller based dot matrix advert display. Firstly computer aided design is the modeling of physical system on...
View DetailsAN EXAMINATION OF EFFECTIVE LABOUR CONTROL IN THE CONSTRUCTION INDUSTRY
CHAPTER ONE
INTRODUCTION
BACKGROUND OF THE STUDY: Labor control in construction is one of the many options of procurement used for the process of project delivery. According to the records, this method of procurement is the oldest one there is, and it has been in use in Nigeri...
View DetailsCONSTRUCTION OF AN AUTOMATIC WATER LEVEL CONTROLLER
ABSTRACT
The project design and construction of an automatic water level controller is aimed at realizing a simple, portable cost effective system capable of controlling the water level in an overhead water tank. This project report details the construction processes employed in impleme...
View DetailsDESIGN AND CONSTRUCTION OF 20WATTS WIRELESS PUBLIC ADDRESS SYSTEM
ABSTRACT
It has become inevitable that there would be communication and due to the inherent limitation of the human voice, the public address system came to being. A public address or “P.A SYSTEM” is an electronic amplification system with a mixer
,amplifier and lo...
View DetailsDESIGN AND CONSTRUCTION OF JOURNAL BEARING DEMONSTRATION RIG
ABSTRACT
The journal bearing demonstration rig is an apparatus which is used to study how pressure would vary around the section of a journal bearing at various speed of the shaft and loading conditions. The design of the journal bearing was done by the use of standard design procedures...
View DetailsDEVELOPMENT OF A FRAMEWORK FOR BUILDING INFORMATION MODELING (BIM) IN FEDERAL UNIVERSITIES SOUTH-EAST NIGERIA
1.1Background of Study
Building has evolved through many centuries from dwelling in caves to skyscrapers and recently to intelligent structures that can smartly respond to stimuli in its environment (Azhar, 2010). This view was corroborated by Kiviniemi, Fischer and Bazjanac (2005) that...
View DetailsEXPLORING CROSS-LAMINATED TIMBER USE FOR TEMPORARY MILITARY STRUCTURES: BALLISTIC CONSIDERATIONS
SUMMARY
The design and construction of temporary military structures, built to house personnel in theater, have changed little since World War II. While lightweight, rapidly deployable, and quick to erect, these gage metal or wood frame structures provide minimal ballis...
View DetailsDESIGN AND IMPLEMENTATION OF A CONTRACT MANAGEMENT SYSTEM
CHAPTER ONE
INTRODUCTION
1.1 BACKGROUND OF THE STUDY
In November 1999, at Counter Entropy Strategies’ Summit on Software in Chicago, USA, 60 top executives fro...
View DetailsDETERMINING THE EFFECT OF PARTICLE SIZE DISTRIBUTION ON SHEAR BEHAVIOR OF SOIL
CHAPTER ONE
INTRODUCTION
1.1 Background to the Study
Soil behavior is a fundamental factor in geotechnical enginee...
View Details